Yamaha SY-35, Product Manual

Page: 67 / 135

VOICE VECTOR
LEVEL SPEED (Vector Rate)
Summary: Sets the time between level vector
steps.
Settings: 10 ... 160 milliseconds (in 10-millisecond
steps)
Procedure: Use the key to move the cursor to
the lower display line. Use the [-1/NO] and
[+1/YES] keys to select the desired vector rate.
Details: Each dynamic vector is composed of up to
50 "steps" corresponding to points along the
path followed by the vector control. This function
sets the initial time between each step. The
Time parameter in the LEVEL EDIT function,
described later, allows the length of individual
steps to be edited. The vector rate parameter
can be changed even after recording a vector,
producing a corresponding change in the spacing
between the steps.
The LEVEL SPEED parameter can also be used
to change the playback speed of a pre-recorded
vector.
LEVEL RECORD
Summary: Allows recording of a dynamic level
vector.
Settings: STBY, REC, PLAY
Procedure: Use the cursor keys to
place the underline cursor under STBY. The vec-
tor control LEVEL mode will be automatically
selected and you can rehearse the vector sweep
you wish to record.
Move the cursor to REC. Recording will actually
begin as soon as you play a key on the key-
board. When you release the key or when 50
steps have been recorded (See "LEVEL
SPEED" above), recording will end and the cur-
sor will move to the PLAY position. You can
now play the keyboard to hear how the vector
sweep you just recorded sounds.
Details: The amount of time available for recording
depends both on the vector rate setting and how
much the vector control is moved.
LEVEL EDIT (Step, X-axis, Y-axis & Time)
Step
Settings: 1 ... 50
Summary: Selects any of the 50 steps in a recorded
level vector for editing.
cursor keys to
place the underline cursor under the leftmost
value on the lower display line (Step). Use the
[-1/NO] and [+1/YES] keys to select the step
to be edited.
Procedure: Use the
11