Yamaha SY-35, Product Manual, Page: 29 / 135

Turn Vector Play ON
Now press the VECTOR PLAY [ON/OFF] key to turn the VECTOR
PLAY mode ON, and select [LEVEL] control.
Since Vector Play is ON, the dynamic vector will not play. Set the
VECTOR CONTROL to center position and play another note or chord.
You should hear all 4 elements at the same time, in approximately equal
proportions. Play with the VECTOR CONTROL a bit to get a feel for this
particular combination of elements.
VECTOR CONTROL
Recording An Original
Dynamic Vector
Now we'll go ahead and record an original dynamic level vector for the SP*Bell
voice.
Select the VOICE VECTOR Edit Mode
The first step is to enter the VOICE VECTOR edit mode, which we do by
pressing the [EDIT/UTILITY] key and then the [VOICE VECTOR] key.
Select the LEVEL SPEED Function
If the LEVEL SPEED function does not appear immediately when you
enter the VOICE VECTOR edit mode, press the [VOICE VECTOR] key a
few times until it does appear (Feature Reference manual, page 11).
25