Yamaha SY-35, Product Manual

Page: 7 / 135

Precautions
1. AVOID EXCESSIVE
HEAT, HUMIDITY,
DUST AND
VIBRATION
Keep the SY35 away from locations where it is likely to be exposed to high tem-
peratures or humidity — such as near radiators, stoves, etc. Also avoid loca-
tions which are subject to excessive dust accumulation or vibration which could
cause mechanical damage.
2. AVOID PHYSICAL
SHOCKS
Strong physical shocks to the SY35 can cause damage. Handle it with care.
3. DO NOT OPEN THE
CASE OR ATTEMPT
REPAIRS OR
MODIFICATIONS
YOURSELF
This product contains no user-serviceable parts. Refer all maintenance to quali-
fied Yamaha service personnel. Opening the case and/or tampering with the
internal circuitry will void the warranty.
4. MAKE SURE POWER IS
OFF BEFORE MAKING
OR REMOVING
CONNECTIONS
Always turn the power OFF prior to connecting or disconnecting cables.
5. HANDLE CABLES
CAREFULLY
Always plug and unplug cables by gripping the connector, not the cord.
6. CLEAN WITH A SOFT
DRY CLOTH
Never use solvents such as benzine or thinner to clean the unit. Wipe clean with
a soft, dry cloth.
7. ALWAYS USE THE
CORRECT POWER
SUPPLY
Always use the supplied AC Adaptor to power your SY35 or, if the original
adaptor is lost or broken, a replacement or equivalent type obtained from your
Yamaha dealer. Also, make sure that the adaptor you have is appropriate for the
AC mains supply voltage in the area where you intend to use the SY35 (the
correct INPUT voltage is marked on the adaptor).
8. ELECTRICAL
INTERFERENCE
Since the SY35 contains digital circuitry, it may cause interference and noise if
placed too close to TV sets, radios or similar equipment. If such a problem does
occur, move the SY35 further away from the affected equipment.
9. MIDI CABLES When connecting the SY35 to MIDI equipment, be sure to use high-quality
cables made especially for MIDI data transmission. Also avoid cables longer
than about 15 meters, as longer cables can pick up electrical noise that can
causes data errors.
3