Yamaha SY-35, Product Manual

Page: 34 / 135

Select the Destination Memory Location
Select the memory location to which you want to store the new voice using
the standard voice selection procedure.
Press CURSOR
When the target memory location has been selected, press the cursor
key. "Are you sure?" will appear on the display.
Press [+1/YES] to Confirm and Store
Confirm your intention to store the new voice by pressing the [+1/YES]
key, and the store operation will begin. "»Completed!«" will appear on
the display briefly when the store operation is finished, and the SY35 will
return to the VOICE PLAY mode.
The SY35 also has a [STORE] key that can be used to store
voices and multi setups (described on page 38) to INTERNAL or
CARD memory locations. Operation of the [STORE] key is de-
scribed on page 10.
For More Detailed
Vector Control ... You now have a edited version of SP*Bell featuring your own original dynamic
level vector. You could use the VOICE COMMON edit mode NAME function
(Feature Reference manual, page 5) to give the voice a new name — VectBell
for example. Using the same procedure you could create an infinite range of vari-
ations on the preset voices.
The method of dynamic vector recording just described is quick and easy —
all you have to do is operate the VECTOR CONTROL and use your ears. This
quick-and-easy method is recommended for most applications. If you want really
fine control, however, the SY35 offers a number of level and detune vector edit-
ing functions that allow the position and length of each vector step to be pre-
cisely programmed as required. See pages 11 through 14 of the Feature
Reference manual for details.
30