Yamaha SXV70ERG, Supplementary Service Manual

Page: 53 / 173

–47–
STEERING
CHAS
NOTE:
CAUTION:
a
b d
c
4. Install:
S
Relay rod 1
Make sure that the end of the relay rod with the
indentation
a
is connected to the relay arm.
Always use new cotter pins.
Nut (relay rod):
35 Nm (3.5 m
S
kg, 25 ft
S
lb)
5. Adjust:
S
Skis
Adjustment steps:
S
Temporarily install the handlebar.
S
Hold the handlebar straight and check that the
skis are at right angles to the handlebar.
S
Loosen the locknuts (relay rod) 1 .
S
Position the skis parallel in the riding direction.
S
With the skis in this position, turn the relay rod
2 in either direction until the handlebars at
right angles with respect to the direction of
movement.
Turning the relay
rod in direction Turning the handle-
bar in direction
Turning the relay
rod in direction Turning the handle-
bar in direction
S
Tighten the locknuts (relay rod) 1 .
Locknut (relay rod):
25 Nm (2.5 m
S
kg, 18 ft
S
lb)
LOCTITE
