Yamaha SXV70ERG, Supplementary Service Manual

Page: 104 / 173

–98–
RECOIL STARTER
ENG
NOTE:
NOTE:
NOTE:
INSTALLATION
1. Wind:
S
Starter rope (2 1 / 2 times counterclockwise)
(in the sheave drum)
2. Install:
S
Starter spring 1
S
Sheave drum assembly 2
S
Mesh the spring hook 3 with the case slit,
then wind the spring counterclockwise into the
case from a larger to a smaller diameter.
S
Mesh the sheave drum hook 4 with the spring
hook 5 .
3. Install:
S
Drive pawl 1
S
Cam guide 2
S
Drive plate 3
The cam guide 2 should not be on top of the
drive pawl 1 .
4. Pull about four inches of starter rope out of
the cutout portion in the sheave drum and ro-
tate the sheave drum 4 1 / 2 times counter-
clockwise to preload the starter spring.
Pass the rope through the case hole and make
a knot
1 in the rope so that the rope is not
pulled into the case.