Yamaha S70 XS Reference Manual Download

Page: 145 / 160

Reference Manual

Reference

145

Layer/Split/
Drum Assign

Determines which buttons become unavailable when turning on the [PANEL

LOCK] button on the panel.

All (Panel Lock Section All)

Octave & Transpose (Panel Lock Section Octave and Transpose)

Number 1 – 16 (Panel Lock Section Number 1 – 16)

When the checkbox of “All” is entered, all buttons and controllers become unavailable, except for the following.

• Pitch Bend wheel

• Modulation wheel

• INPUT GAIN knob

• Master Volume slider

• Keyboard

When the checkbox of “Octave & Transpose” is entered, the OCTAVE and TRANSPOSE buttons become unavailable.

When the checkbox of “Number 1 – 16” is entered, the Number [1] – [16] buttons become unavailable.

Settings:

on, off

You can restore this tone generator’s User memory (

page 24

) to the factory default settings (Factory Set). Please note

that the setting of the Power On Auto Factory Set on this display will be stored automatically by executing Factory Set.

CAUTION

When you restore the factory default settings, the internal flash memory as well as the internal User memory data (all the User

Voices, Multis, and system settings in the Utility you created) will be overwritten with the factory defaults. Take care so as not to

lose important data. You should back up any important data to a USB storage device as a file with the “All” type in the File mode

or a computer by using the Bulk Dump function (

page 127

Auto Factory Set (Power On Auto Factory Set)

When this parameter is set to “on,” turning the power on will restore the User memory to the factory default settings. If

you change this setting, make sure to execute the Factory Set function to finalize the change.

Settings:

off, on

CAUTION

When setting Auto Factory Set to “on” and executing Factory Set, the Factory Set function will automatically be executed each

time you turn the power on. For this reason, this normally should be set to “off.”

8 Panel Lock

9 Fctry Set (Factory Set)

Summary of Contents for S70 XS

































































































































































Search results

Summary of Contents for S70 XS

Reviews:

Related manuals for S70 XS

Brands by name

Popular brands

Yamaha S70 XS, Reference Manual

Search results

Summary of Contents for S70 XS

Reviews:

Related manuals for S70 XS

Brands by name

Popular brands