Yamaha S70 XS Reference Manual Download

Page: 117 / 160

Reference Manual

Reference

117

Zone Switch

Determines whether or not the keyboard will be divided into (up to) eight

independent areas (called “Zones”).

Settings:

off, on

Knob/Slider

When the “Zone Switch” is set to “on,” the Knobs and Sliders work as the Zone controllers, when set to “off,” they work

as the controller selected by the Knob/ Slider Functions.

When set to “on,” the Knob Function lamps and the Slider Function lamps go out, then the Knobs and Sliders work as

the Zone controller. When the Knobs and Sliders work as the Zone controller, you can determine which functions will be

assigned to the Knobs and Sliders in the Edit display of each Zone.

Settings:

off, on

NOTE:

When the “Zone Switch” is set to “on,” you can select the on/off status via pressing the Knob Functions buttons.

3 Zone Sw (Zone Switch)

Summary of Contents for S70 XS

































































































































































Search results

Summary of Contents for S70 XS

Reviews:

Related manuals for S70 XS

Brands by name

Popular brands

Yamaha S70 XS, Reference Manual

Search results

Summary of Contents for S70 XS

Reviews:

Related manuals for S70 XS

Brands by name

Popular brands