Yamaha S08 Voice Editor, Owner'S Manual

Page: 66 / 88

66
Basics Section Quick Guide Reference Appendix
■
Multi Store [MULTI]
→ → → →
[STORE] Stores your original parameter settings. 50
■
Sequence Play [SEQ PLAY]
Seq Sequence Chain Determines the setting of chained playback (Chain Step).
(Tempo) Tempo Determines the playback tempo. 28
■
Sequence Play Job [SEQ PLAY]
→ → → →
[JOB] 48
1 Init Seq Initialize Sequence Resets (initializes) the chain step settings. 52
2 SeqAll Sequencer All Chain Sets the chained playback (Chain Step) automatically. 52
■
Utility [UTILITY]
Settings... MIDI Data Table 2-3 in the separate Data List
TG (Tone Generator)
1 MasterTune Master Tune Adjusts the tone generator tuning (in 0.1 cent steps; 1000: one semitone).
MIDI CHANNEL
2 Device No Device Number Determines the MIDI Device Number. This number must match the Device Number of the external MIDI
device when transmitting/receiving system exclusive messages. 28
3 Rcv Ch Receive Channel Determines the MIDI Receive channel for using the S08 (in the Voice mode) with an external MIDI
device, and for using it as a MIDI tone generator. (Omni: all channels). 28 *30
4 Trans Ch Transmit Channel Determines the MIDI Transmit channel for transmitting MIDI from the keyboard, controllers and so on.
5 Thru Port Thru Port Many computer sequencers are capable of transmitting data over several MIDI ports, effectively breaking
the 16-channel barrier. When using the USB terminal for MIDI reception, MIDI messages received via
the USB connector can be passed through the MIDI OUT connector of the S08 to other connected
devices. Set the port number here. This is available when the Host Select (UTILITY PAGE 13) is set to
“USB.”
MIDI FILTER
6 RxPgmChng Receive Program Change Enables (on) or disables (off) reception of Program Change/Bank Select messages on the S08 from an
external MIDI device or S08 sequencer.
7 RxBankSel Receive Bank Select
8 TxPgmChng Transmit Program Change Determines whether Program Change/Bank Select messages executed from the S08’s panel are
transmitted via MIDI (on) or not (off).
9 TxBankSel Transmit Bank Select
SEQ SETUP (Sequencer Setup)
10 Sync Sync Determines whether Song playback are synchronized to the S08’s internal clock (int) or an external MIDI
clock (MIDI).
11 Seq Ctl Sequencer Control Determines whether Sequencer Control signals – start, continue and stop – are received and/or
transmitted, and whether MIDI clock messages will be transmitted via the MIDI OUT/USB terminal.
Selected
by Selected
by
Display Parameter Name Explanation
Related
Page
Multi Store / Sequence Play / Sequence Play Job / Utility