Yamaha S08 Voice Editor, Owner'S Manual

Page: 54 / 88

54
Basics Section
Quick Guide
Refer
ence
Appendix
Using the Memory Card
Saving the S08 data to Memory
Card (Save)
You can save files to Memory Card as follows.
1
Press the [CARD] button. Card Mode screen
appears.
2
Use the [ ] button to select the Save screen.
3
To overwrite an existing file, use the [DEC/NO] and
[INC/YES] buttons to select the File, then go to step 6.
4
Press the [ENTER] button to call up the screen for
Name entry.
5
Enter the file name (page 50).
6
Press the [ENTER] button to execute the
operation. A “Completed!” message appears when
the operation has been completed.
n
If the Save operation would result in an existing file
being overwritten, a confirmation prompt appears.
Press the [INC/YES] button to save the file and
overwrite the original data, or press the [EXIT]
button to cancel.
n
The data below can be saved to Memory Card.
•User Normal Voice 1 to 128
•User Drum Voice 1 and 2
•Multi 1 to 32
•System (Utility/controller, Sequence chain)
Loading the S08 Data from Memory
Card (Load)
You can load files from Memory Card to the S08, as
well as select the type of data to be loaded.
❏
Settings : All , An User Normal Voice (1 to 128), An User
Drum Voice (1 and 2)
1
Press the [CARD] button.
Card Mode screen appears.
2
Use the [ ] and [ ] buttons to select the Load
screen.
3
Use the [DEC/NO] and [INC/YES] buttons to select
the File you wish to load.
n
When selecting a file, the “FileNone” message will be
displayed if there is no file on Memory Card.
4
Press the [ENTER] button to call up the display for
selecting the data type.
5
Use the [DEC/NO] and [INC/YES] buttons to select
the data you wish to load. When selecting “All”
here, go to step 8.
n
When selecting the “All,” the data below will be
loaded.
•User Normal Voice 1 to 128
•User Drum Voice 1 and 2
•Multi 1 to 32
•System (Utility/Controller, Sequence chain)
6
Press the [ ] button to call up the display for
selecting the destination user voice number.
7
Use the [DEC/NO] and [INC/YES] buttons to select
the destination user voice number.
8
When you press the [ENTER] button, you will be
prompted for confirmation.
n
The operation will be canceled if you press the
[EXIT] button.
9
Press the [INC/YES] button to execute the
operation. A “Completed” message appears when
the operation has been completed.
NEW _FILE
Save
KEY ELEM PART PAGE
1
OverWrite
Sure?
KEY ELEM PART PAGE
1
All
Load
KEY ELEM PART PAGE
2
>>001Synth
Load
KEY ELEM PART PAGE
2
NEW FILE
Sure?
KEY ELEM PART PAGE
2