background image

GLOSSARY

121

English

ADDITIONAL 

INFO

RMA

T

IO
N

Dolby Surround

Dolby Surround uses a 4 channel analog recording system 
to reproduce realistic and dynamic sound effects: 2 front 
left and right channels (stereo), a center channel for dialog 
(monaural), and a surround channel for special sound 
effects (monaural). The surround channel reproduces 
sound within a narrow frequency range.
Dolby Surround is widely used with nearly all video tapes 
and laser discs, and in many TV and cable broadcasts as 
well. The Dolby Pro Logic decoder built into this unit 
employs a digital signal processing system that 
automatically stabilizes the volume on each channel to 
enhance moving sound effects and directionality.

Dolby Digital

Dolby Digital is a digital surround sound system that gives 
you completely independent multi-channel audio. With 3 
front channels (left, center, and right), and 2 surround 
stereo channels, Dolby Digital provides 5 full-range audio 
channels. With an additional channel especially for bass 
effects, called LFE (low frequency effect), the system has 
a total of 5.1 channels (LFE is counted as 0.1 channel). By 
using 2-channel stereo for the surround speakers, more 
accurate moving sound effects and surround sound 
environment are possible than with Dolby Surround. The 
wide dynamic range (from maximum to minimum 
volume) reproduced by the 5 full-range channels and the 
precise sound orientation generated using digital sound 
processing provide listeners with previously unheard of 
excitement and realism.
With this unit, any sound environment from monaural up 
to a 5.1-channel configuration can be freely selected for 
your enjoyment.
Dolby Digital EX creates 6 full-bandwidth output 
channels from 5.1-channel sources. This is done using a 
matrix decoder that derives 3 surround channels from the 
2 in the original recording. For the best results, Dolby 
Digital EX should be used with movie sound tracks 
recorded with Dolby Digital Surround EX. With this 
additional channel, you can experience more dynamic and 
realistic moving sound especially with scenes with 
“flyover” and “fly-around” effects.

Dolby Pro Logic II

Dolby Pro Logic II is an improved technique used to 
decode vast numbers of existing Dolby Surround software. 
This new technology enables a discrete 5-channel 
playback with 2 front left and right channels, 1 center 
channel, and 2 surround left and right channels (instead of 
only 1 surround channel for conventional Pro Logic 
technology). The Music and Game modes are also 
available for 2-channel sources in addition to the movie 
mode.

Dolby Pro Logic IIx

Dolby Pro Logic IIx is a new technology enabling discrete 
7.1-channel playback from 2-channel or multi-channel 
sources. There is a Music mode for music, a Movie mode 
for movies and a Game mode for games.

DTS (Digital Theater Systems)
Digital Surround

DTS digital surround was developed to replace the analog 
soundtracks of movies with a 6-channel digital sound 
track, and is now rapidly gaining popularity in movie 
theaters around the world. Digital Theater Systems Inc. 
has developed a home theater system so that you can enjoy 
the depth of sound and natural spatial representation of 
DTS digital surround in your home. This system produces 
practically distortion-free 6-channel sound (technically, 
left, right and center channels, 2 surround channels, plus 
an LFE 0.1 channel as a subwoofer, for a total of 5.1 
channels). The unit incorporates DTS-ES decoder that 
enables 6.1- channel reproduction by adding the surround 
back channel to existing 5.1-channel format.

DTS 96/24

DTS 96/24 offers an unprecedented level of audio quality 
for multi-channel sound on DVD-Video, and is fully 
backward-compatible with all DTS decoders. “96” refers 
to a 96 kHz sampling rate (compared to the typical 48 kHz 
sampling rate). “24” refers to 24-bit word length. DTS 96/
24 offers sound quality transparent to the original 96/24 
master, and 96/24 5.1-channel sound with full-quality full-
motion video for music programs and motion picture 
soundtracks on DVD-video.

GLOSSARY

00EN.00_RXZ9_U.book  Page 121  Thursday, November 13, 2003  12:30 PM

Summary of Contents for RX Z9 - AV Receiver





































































































































Reviews: