ZONE 2
100
This unit allows you to configure a multi-room audio-video system. The Zone 2 feature enables you to set this unit to
reproduce separate input sources in the main room and second room (Zone 2) using the supplied remote control from the
second room.
You need the following additional equipment to use this unit’s multi-room functions:
• An amplifier and speakers for the second room.
• A video monitor for the second room.
y
• Since there are a number of ways you can connect and use this
unit in a multi-room installation, we recommend that you
consult your nearest authorized YAMAHA dealer or service
center for the Zone 2 connections that best meet your
requirements.
• Some YAMAHA models are able to connect directly to this
unit’s REMOTE CONTROL OUT jack. If you own these types
of products, you may not need to use an infrared emitter. Up to
6 YAMAHA components can be connected as shown here.
■
System configuration and connection example
Using external amplifiers
To use an external amplifier in Zone 2, select External in ZONE2 AMP.
• When not using the main room, turn down the volume of this unit in the main room. Adjust the Zone 2 volume using the amplifier in
the second room.
• To avoid unexpected noise, DO NOT USE the Zone 2 feature with CDs encoded in DTS.
• Dolby Digital RF signals and signals input through an i.LINK connection are not output from ZONE 2 COAXIAL OUT. Further, the
Zone 2 volume setting does not apply to signals output from ZONE 2 COAXIAL OUT (i.e., input signals are output at the same
volume they are input).
ZONE 2
Zone 2 connections
OUT
IN
OUT
IN
REMOTE
CONTROL OUT
This unit
Notes
This unit
Infrared emitter
DVD player
(or other component)
Amplifier
Video
monitor
Remote control
Infrared signal
receiver
Second room
Main room
ZONE 2 AUDIO OUT or
ZONE 2 COAXIAL OUT
ZONE 2 VIDEO OUT
REMOTE CONTROL OUT
DVD INPUT
ZONE 2 REMOTE IN
00EN.00_RXZ9_U.book Page 100 Thursday, November 13, 2003 12:30 PM
