Connecting a device compatible with the trigger
function
The trigger function can control an external device in conjunction with operating the
unit (such as powering on/off and input selection). If you have a Yamaha subwoofer
that supports a system connection or a device with a trigger input jack, you can use
the trigger function by connecting the external device to the TRIGGER OUT jack with a
monaural mini-jack cable.
AUDIO 4
AUDIO 5
OPTICAL
OPTICAL
COAXIAL
COAXIAL
AUDIO 1
AUDIO 2
AUDIO 3
AV 1
AV 2
P
B
Y
P
R
ANTENNA
FM
AM
VIDEO
REMOTE
IN
OUT
TRIGGER OUT
12V
0.1A
COMPONENT VIDEO
(1 MOVIE)
(5 STB)
( 7 TV )
( 3 MUSIC )
( 2 RADIO )
PHONO
GND
1
1
2
ARC
2
HDMI OUT
HDCP2.2
(
)
ZONE OUT
ZONE 2
TRIGGER OUT
12V
0.1A
The unit (rear)
TRIGGER OUT jack
System connector
jack
Yamaha subwoofer that
supports a system connection
NOTE
You can configure the trigger function settings. For details, see the following:
▪ “Specifying the zone with which the TRIGGER OUT jack functions are synchronized” (p.133)
7
Plugging in the power cable
Plugging in the power cable
WARNING
(Taiwan, Brazil and Central and South America models only)
Make sure you set VOLTAGE SELECTOR of the unit BEFORE plugging the power cable into an AC wall
outlet. Improper setting of VOLTAGE SELECTOR may cause damage to the unit and create a potential
fire hazard.
Before plugging in the power cable
Set the switch position of VOLTAGE SELECTOR according to your local voltage. Voltages are AC 110–
120/220–240 V, 50/60 Hz.
SURROUND BACK
/ BI-AMP
F.PRESENCE
EXTRA SP1
EXTRA SP2
/ ZONE2
220V-
240V
110V-
120V
VOLTAGE SELECTOR
The unit (rear)
VOLTAGE SELECTOR
After all the connections are complete, plug in the power cable.
FRONT
SURROUND BACK
/ ZONE2 / BI-AMP
SPEAKERS
NETWORK
F.PRESENCE
EXTRA SP1
EXTRA SP2
(4 NET RADIO)
(8 SERVER)
/ ZONE2
The unit (rear)
To an AC wall outlet
En
35
