Yamaha RX-V685 Owner'S Manual Download Page 136

Page: 136 / 186

Configuring the advanced settings (ADVANCED SETUP menu)

Basic operation of the ADVANCED SETUP menu

Perform the following basic procedure to operate the “ADVANCED SETUP” menu while
viewing the front display.

Set the unit to standby mode.

While holding down STRAIGHT on the front panel, press

(power).

(MAIN ZONE)

STRAIGHT

PROGRAM

The top item and its setting of the “ADVANCED SETUP” menu appear on

the front display.

Press PROGRAM to select an item.

Press STRAIGHT to select a setting.

Press

(power) to set the unit to standby mode and turn it on

again.

This completes the settings.

NOTE

For details on the default settings, see the following:

▪ “Default settings of the ADVANCED SETUP menu” (p.185)

ADVANCED SETUP menu items

Use the following table to configure system settings of the unit.

Item

Function

Page

SP IMP.

Changes the speaker impedance setting.

p.137

REMOTE ID

Selects the unit’s remote control ID.

p.137

(Asia and General models only)
Changes the FM/AM tuning frequency setting.

p.137

TV FORMAT

Switches the video signal type of HDMI output.

p.137

MON.CHK

Removes the limitation on HDMI video output.

p.138

4K MODE

Selects the HDMI 4K signal format.

p.138

DTS MODE

Selects the information to be sent to the BD player connected to
the unit about the DTS formats that the unit supports.

p.139

BKUP/RSTR

Backups and restores all the settings for the unit.

p.139

INIT

Restores the default settings.

p.140

UPDATE

Updates the firmware.

p.140

VERSION

Checks the version of firmware currently installed on the unit.

p.140

136

Summary of Contents for RX-V685



























































































































































































Search results

Summary of Contents for RX-V685

Reviews:

Related manuals for RX-V685

Brands by name

Popular brands

Yamaha RX-V685, Owner'S Manual

Search results

Summary of Contents for RX-V685

Reviews:

Related manuals for RX-V685

Brands by name

Popular brands