Yamaha RX-V685 Owner'S Manual Download

Page: 146 / 186

Video trouble

No video

Another input source is selected on the unit.

Select an appropriate input source with the input selection keys.

Another input source is selected on the TV.

Switch the TV input to display the video from the unit.

The video signal output from the unit is not supported by the TV.

Check the video output setting of the playback device. For information about video

signals supported by the TV, refer to the instruction manuals for the TV.

The cable connecting the unit and TV (or playback device) is defective.

If there is no problem with the connection, replace with another cable.

No video from the playback device connected to the
unit with HDMI

The input video signal (resolution) is not supported by the unit.

To check the information about the current video signal (resolution) and video

signals supported by the unit, see the following:

– “Checking the current video and HDMI signal information” (p.114)
– “HDMI signal compatibility” (p.176)

The TV does not support HDCP (High-bandwidth Digital Content Protection).

Refer to the instruction manuals for the TV and check the TV’s specifications.

The number of devices connected to the HDMI OUT jack is over the limit.

Disconnect some of the HDMI devices.

No image (contents required the HDCP 2.2/2.3 -
compatible HDMI device) from the playback device

The TV (HDMI input jack) does not support HDCP 2.2/2.3.

Connect the unit to the TV (HDMI input jack) that supports HDCP 2.2/2.3. (The

Warning message can be displayed on the TV screen.)

The menu of the unit is not displayed on the TV

Another input source is selected on the TV.

Switch the TV input to display the video from the unit (HDMI OUT jack).

The video is interrupted

If you are using two TVs in the Main zone, another TV is turned off when “HDMI
OUT 1+2” is selected.

Select “HDMI OUT 1” or “HDMI OUT 2” to output the signals only to the TV you are

using. For details on selecting HDMI output, see the following:

– “Selecting an HDMI output jack” (p.57)

146

Summary of Contents for RX-V685



























































































































































































Search results

Summary of Contents for RX-V685

Reviews:

Related manuals for RX-V685

Brands by name

Popular brands

Yamaha RX-V685, Owner'S Manual

Search results

Summary of Contents for RX-V685

Reviews:

Related manuals for RX-V685

Brands by name

Popular brands