Yamaha RX-V481 Owner'S Manual Download Page 98

Page: 98 / 133

ECO

Configures the power supply settings.

Note

Default settings are underlined.

Auto Power Standby

Set the amount of time for the auto-standby function.

Settings

Off

Does not set the unit to standby mode automatically.

20 minutes

Sets the unit to standby mode when you have not operated the unit and
the unit has not detected any input signal for the specified time.

2 hours, 4 hours,
8 hours, 12 hours

Sets the unit to standby mode when you have not operated the unit for the
specified time.

Default

U.K. and Europe models: 20 minutes
Other models: Off

Note

Just before the unit enters standby mode, “AutoPowerStdby” appears and then countdown starts in the front
display.

ECO Mode

You can reduce the unit’s power consumption by setting the eco mode to “On”. After
setting, be sure to press ENTER to restart the unit.
When the eco mode is enabled, you can reduce the unit’s power consumption.

Settings

Off

Disables the eco mode.

Enables the eco mode.

Note

▪ When “ECO Mode” is set to “On”, the front panel display may become dark.
▪ If you want to play audio at high volume, set “ECO Mode” to “Off”.

Summary of Contents for RX-V481






































































































































Search results

Summary of Contents for RX-V481

Reviews:

Related manuals for RX-V481

Brands by name

Popular brands

Yamaha RX-V481, Owner'S Manual

Search results

Summary of Contents for RX-V481

Reviews:

Related manuals for RX-V481

Brands by name

Popular brands