Updating the unit’s firmware via the network
New firmware that provides additional features or product improvements will be
released as needed. If the unit is connected to the Internet, you can download the
firmware via the network and update it.
Notice
▪ Do not operate the unit or disconnect the power cable or network cable during firmware update.
Firmware update takes about 20 minutes or more (depending on your Internet connection speed).
▪ If the Internet connection speed is slow, or the unit is connected to the wireless network, network
update may not be possible depending on the condition of the wireless connection. In this case, update
the firmware using the USB memory device (p.108).
▪ To perform the following procedure, your TV must be connected to the unit via HDMI. If not, perform the
update from the “ADVANCED SETUP” menu (p.108).
▪ For details on update, visit the Yamaha website.
Note
You can also update the firmware using the USB memory device from the “ADVANCED SETUP” menu
(p.108).
A firmware update is available if the following message is displayed after SETUP is
pressed.
CANCEL
RETURN
Network Setup
New firmware available.
Press ENTER to update now.
(You can also start the update
from the "Setup-Network"
screen.)
Language
<English>
You can switch the language.
1
Read the on-screen description and press ENTER.
2
To start the firmware update, press ENTER.
The on-screen display turns off.
3
If “UPDATE SUCCESS PLEASE POWER OFF!” appears on the
front display, press
z
(power) on the front panel.
The firmware update is complete.
En
109
