Yamaha RX-V459 - AV Receiver - 6.1 Channel Owner'S Manual Download Page 95

Page: 95 / 111

RESETTING THE SYSTEM

ANCED

OPERA

ION

Use this feature to reset all the parameters of this unit to the initial factory settings.

• This procedure completely resets all the parameters of this unit including the “SET MENU” parameters. However, the advanced setup

menu parameters will not be initialized.

• The initial factory settings are activated next time you turn on this unit.

To cancel the initialization procedure at any time without making any changes, press STANDBY/ON on the front panel (or STANDBY
on the remote control) to set this unit to the standby mode.

Press STANDBY/ON on the front panel to set
this unit to the standby mode.

Press and hold STRAIGHT (EFFECT) on the
front panel and then press STANDBY/ON to
turn on this unit.

This unit turns on, and the advanced setup menu
appears in the front panel display.

Press the PROGRAM

buttons on the

front panel to select “PRESET”.

Press STRAIGHT (EFFECT) on the front
panel repeatedly to select “RESET”.

Select “CANCEL” to cancel the initialization procedure
without making any changes.

Press STANDBY/ON on the front panel to
confirm your selection and set this unit to the
standby mode.

RESETTING THE SYSTEM

Notes

VOLUME

AUTO/MAN'L

MAN'L/AUTO FM

LEVEL

NEXT

EDIT

EFFECT

MEMORY

FM/AM

PRESET/TUNING

A/B/C/D/E

PROGRAM

BASS/TREBLE

PRESET/TUNING/CH

TUNING MODE

INPUT MODE

TONE CONTROL

STRAIGHT

SPEAKERS

PHONES

SILENT CINEMA

STANDBY

/ON

MULTI CH

INPUT

SEARCH MODE

DISPLAY

CATEGORY

VIDEO

PORTABLE

L AUDIO R

VIDEO AUX

2,4

1-2,5

(U.S.A. model)

STANDBY

/ON

STANDBY

/ON

EFFECT

STRAIGHT

While holding

down

PROGRAM

PRESET-CANCEL

EFFECT

STRAIGHT

PRESET-RESET

STANDBY

/ON

Summary of Contents for RX-V459 - AV Receiver - 6.1 Channel
















































































































Search results

Summary of Contents for RX-V459 - AV Receiver - 6.1 Channel

Reviews:

Related manuals for RX-V459 - AV Receiver - 6.1 Channel

Brands by name

Popular brands

Yamaha RX-V459 - AV Receiver - 6.1 Channel, Owner'S Manual

Search results

Summary of Contents for RX-V459 - AV Receiver - 6.1 Channel

Reviews:

Related manuals for RX-V459 - AV Receiver - 6.1 Channel

Brands by name

Popular brands