29
BASIC SETUP
PRE
P
ARA
T
ION
9
Press
j
/
i
to select the desired setting.
Choices:
YES
, NO
• Select “YES” to complete the setup procedure if
the test tone levels from each speaker were
satisfactory.
• Select “NO” to proceed to the speaker level
adjustment menu to balance the output level of
each speaker.
10
Press ENTER to confirm your selection.
• If you selected “YES” in step 9, the setup
procedure is completed and the display returns to
the top “SET MENU” display.
• If you selected “NO” in step 9, the front speaker
level adjustment display appears in the front panel
display.
11
Press
d
/
u
to select a speaker and then
j
/
i
to adjust the balance.
The selected speaker and the front left speaker or the
surround left speaker output a test tone in turn.
• Press
i
to increase the value.
• Press
j
to decrease the value.
FR ----||----
• Select “FR” to adjust the balance between the front
left and right speakers.
• Select “C” to adjust the balance between the front
left and center speakers.
• Select “SL” to adjust the balance between the front
left and surround left speakers.
• Select “SB” to adjust the balance between the
surround left and surround back speakers.
• Select “SR” to adjust the balance between the
surround left and surround right speakers.
• Select “SWFR” to adjust the balance between the
front left speaker and the subwoofer.
12
Press SET MENU to exit from “BASIC
SETUP”.
A-E/CAT.
A-E/CAT.
ENTER
PRESET/CH
CHECK OK?
..YES
A-E/CAT.
A-E/CAT.
ENTER
PRESET/CH
A-E/CAT.
A-E/CAT.
ENTER
PRESET/CH
A-E/CAT.
A-E/CAT.
ENTER
PRESET/CH
MENU
SET MENU
SRCH MODE
