Yamaha RX-V459 - AV Receiver - 6.1 Channel Owner'S Manual Download Page 11

Page: 11 / 111

CONTROLS AND FUNCTIONS

TR
ODUC

Cursor buttons

, ENTER

Select and adjust the sound field program parameters or
the “SET MENU” parameters.

RETURN

Returns to the previous menu level when adjusting the
“SET MENU” parameters.

TRANSMIT indicator

Flashes while the remote control is sending infrared
signals.

STANDBY

Sets this unit to the standby mode (see page 26).

POWER

Turns on this unit (see page 26).

SLEEP

Sets the sleep timer (see page 34).

MULTI CH IN

Selects the component connected to the MULTI CH
INPUT jacks as the input source when using an external
decoder, etc. (see page 37).

/–

Increases or decreases the volume level.

Component selector switch

Selects the operation mode of the remote control buttons
in the shaded area.

AMP

Operates this unit.

SOURCE

Operates the component selected with an input
selector button (see page 87).

Operates the TV assigned to either DTV/CBL or

(see page 86).

• To set the remote control codes for other components, see

page 88.

• When you set the remote control codes for both DTV/CBL and

(see page 87), priority is given to the one set for DTV/

CBL.

MUTE

Mutes the audio output. Press again to restore the audio
output to the previous volume level (see page 32).

STRAIGHT (EFFECT)

Turns the sound field programs off or on. When
“STRAIGHT” is selected, 2-channel or multi-channel
input signals are output directly from their respective
speakers without effect processing (see page 37).

NIGHT

Turns on or off the night listening modes (see page 32).

SET MENU

Enters “SET MENU” (see page 76).

Notes

Summary of Contents for RX-V459 - AV Receiver - 6.1 Channel
















































































































Search results

Summary of Contents for RX-V459 - AV Receiver - 6.1 Channel

Reviews:

Related manuals for RX-V459 - AV Receiver - 6.1 Channel

Brands by name

Popular brands

Yamaha RX-V459 - AV Receiver - 6.1 Channel, Owner'S Manual

Search results

Summary of Contents for RX-V459 - AV Receiver - 6.1 Channel

Reviews:

Related manuals for RX-V459 - AV Receiver - 6.1 Channel

Brands by name

Popular brands