En
90
Speaker (Manual Setup)
Configures the speaker settings manually.
■
Power Amp Assign
Selects a speaker system.
In addition to the 5.1- or 7.1-channel speaker system, various speaker configurations
are possible using the presence speakers, Zone2 speakers or bi-amp connection.
Settings
■
Configuration
Configures the output characteristics of the speakers.
• When you configure the speaker size, select “Large” if the woofer diameter of your speaker is 16 cm or
larger or “small” if it is smaller than 16 cm.
❑
Front
Selects the size of the front speakers.
Settings
• “Front” is automatically set to “Large” when “Subwoofer” is set to “None”.
❑
Center
Selects whether or not a center speaker is connected and its size.
Settings
❑
Surround
Selects whether or not surround speakers are connected and its size.
Settings
Basic (default)
Select this when you use a normal speaker system (not to use Zone2
speakers or bi-amp connection).
7ch+1ZONE
Select this when you use Zone2 speakers (p.69) in addition to the
speaker system in the main zone.
5ch BI-AMP
Select this when you connect front speakers that support bi-amp
connections (p.19).
Large
Select this for large speakers.
The front speakers will produce all of the front channel frequency
components.
Small (default)
Select this for small speakers.
The subwoofer will produce front channel low-frequency components
(configurable in “Bass Cross Over”).
Large
Select this for large speaker.
The center speaker will produce all of the center channel frequency
components.
Small (default)
Select this for small speaker.
The subwoofer will produce center channel low-frequency components
(configurable in “Bass Cross Over”).
None
Select this when no center speaker is connected.
The front speakers will produce center channel audio.
Large
Select this for large speakers.
The surround speakers will produce all of the surround channel
frequency components.
Small (default)
Select this for small speakers.
The subwoofer will produce surround channel low-frequency
components (configurable in “Bass Cross Over”).
None
Select this when no surround speakers are connected.
The front speakers will produce surround channel audio. Virtual
CINEMA DSP works when you select a sound program.
