Yamaha RX-A710 Owner'S Manual Download Page 102

Page: 102 / 128

102

ADVANCED SETUP menu items

Changing the speaker impedance setting (SP IMP.)

Change the speaker impedance settings of unit depending on the impedance of the
speakers connected.

Settings

Selecting the remote control ID (REMOTE ID)

Select the remote control ID of the main unit so that it matches to the ID of the remote
control (default: ID1). When using multiple Yamaha AV receivers, you can set each
remote control with a unique remote control ID for its corresponding receiver.

Settings

ID1 (default), ID2

■

Changing the remote control ID of the remote control

Perform each of the following steps within 1 minute. Otherwise, the setting will be
automatically canceled.

Press CODE SET on the remote control using a pointed object such as the tip of a

ballpoint pen.

Press SOURCE/RECEIVER.

Use the numeric keys to enter “5019” (ID1) or “5020” (ID2).

Once the remote control ID is registered successfully, SOURCE/RECEIVER blinks twice.

If it blinks 6 times, registration failed. Repeat from step 1.

• The registered remote control codes (p.104) are not cleared even if you change the remote control ID.

Resetting the Parental Lock code number (SR LOCK)

Reset the Parental Lock code number for SIRIUS Satellite Radio.

Choices

Switching the video signal type (TV FORMAT)

Switch the video signal type of this unit so that it matches to the format of your TV.

Settings

NTSC (default), PAL

Item

Function

Page

SP IMP.

Changes the speaker impedance setting.

102

REMOTE ID

Selects the remote control ID of the main unit.

102

SR LOCK

Resets the Parental Lock code number for SIRIUS
Satellite Radio.

102

TV FORMAT

Switches the video signal type.

102

MON.CHK

Removes the limitation on HDMI video output.

103

INIT

Restores the default settings.

103

UPDATE

Updates the firmware.

103

VERSION

Checks the version of firmware currently installed on
this unit.

103

MIN

Select this when you connect 6-ohm speakers to this unit. You can also
use 4-ohm speakers as the front speakers.

MIN (default)

Select this when you connect 8-ohm or higher speakers to this unit.

SPIMP.-8MIN

REMOTEID-ID1

RESET

Resets the Parental Lock code number.

CANCEL

Does not perform a reset.

IRIU

VOL.

MUTE

LOCK-CANCEL

TVFORMAT-NTSC

Summary of Contents for RX-A710

































































































































Search results

Summary of Contents for RX-A710

Reviews:

Related manuals for RX-A710

Brands by name

Popular brands

Yamaha RX-A710, Owner'S Manual

Search results

Summary of Contents for RX-A710

Reviews:

Related manuals for RX-A710

Brands by name

Popular brands