Yamaha RX-A710 Owner'S Manual Download Page 20

Page: 20 / 128

■

Video/audio jacks

HDMI jacks

Transmit digital video and digital sound through a single
jack. Use an HDMI cable.

• Use a 19-pin HDMI cable with the HDMI logo. We recommend using

a cable less than 5.0 m (16.4 ft) long to prevent signal quality
degradation.

• To connect a device that has a DVI jack, an HDMI/DVI-D cable is

required.

• The HDMI jacks of this unit support the HDMI Control, Audio Return

Channel (ARC), and 3D video transmission (through output)
features.

■

Video jacks

COMPONENT VIDEO jacks

Transmit video signals separated into three
components: luminance (Y), chrominance blue (PB),
and chrominance red (PR). Use a component video
cable with three plugs.

VIDEO jacks

Transmit analog video signals. Use a video pin cable.

■

Audio jacks

OPTICAL jacks

Transmit digital audio signals. Use a digital optical
cable. Remove the tip protector (if available) before
using the cable.

COAXIAL jacks

Transmit digital audio signals. Use a digital coaxial
cable.

AUDIO jacks

Transmit analog stereo audio signals. Use a stereo pin
cable.

Input/output jacks and cables

HDMI cable

Component video cable

Video pin cable

Digital Optical cable

Digital coaxial cable

Stereo pin cable

Summary of Contents for RX-A710

































































































































Search results

Summary of Contents for RX-A710

Reviews:

Related manuals for RX-A710

Brands by name

Popular brands

Yamaha RX-A710, Owner'S Manual

Search results

Summary of Contents for RX-A710

Reviews:

Related manuals for RX-A710

Brands by name

Popular brands