Yamaha RX-A710 Owner'S Manual Download Page 34

Page: 34 / 128

The following screen appears on the TV.

• To cancel the operation, disconnect the YPAO microphone before starting

the measurement.

• YPAO measurement is not performed correctly when any obstacles are in

the room.

• During the measuring process (about 3 minutes), keep stuff in the corners

or remove it from the room.

To start the measurement, use the cursor keys to
select “Measure” and press ENTER.

The measurement will start in 10 seconds. Press ENTER
again to start the measurement immediately.

• To cancel the measurement, press RETURN.

The following screen appears on the TV when the
measurement finishes.

• If any error message (such as E-1) or warning message (such as W-1)

appears, see “Error messages” (p.36) or “Warning messages” (p.37).

• To check the measurement results, select “Result”. For details, see

“Checking the measurement results” (p.35).

Use the cursor keys to select “Save/Cancel” and
press ENTER.

To save the measurement results, use the cursor
keys to select “SAVE” and press ENTER.

The corrected speaker settings are applied.

• To finish the measurement without saving the result, select “CANCEL”.

Disconnect the YPAO microphone from this unit.

Now optimization of the speaker settings is complete.

Caution

• Since the YPAO microphone is sensitive to heat, do not place the microphone

in any place where it will be subjected to direct sunlight or high temperatures
(top of an AV equipment, etc).

CENE

RETURN

VOLUME

UR. DECODE

TRAIGHT

ENHANCER

LEEP

PURE DIRECT

HDMI

V-AUX

INFO

MEMORY

PRE

MOVIE

DVD

RADIO

MUTE

ENTER

MODE

TV VOL

TOP

MENU

POP-UP

MENU

PLAY

OURCE

MAIN

ZONE 2

RECEIVER

CODE

INPUT

DOCK

AUDIO

OPTION

CREEN

TUNER

NET

TUN./CH

IRIU

HOLD

CATEGORY

CENE

VOLUME

UR. DECODE

TRAIGHT

ENHANCER

LEEP

PURE DIRECT

HDMI

V-AUX

MEMORY

PRE

MOVIE

DVD

RADIO

MUTE

MODE

TV VOL

TOP

MENU

POP-UP

MENU

PLAY

OURCE

MAIN

ZONE 2

RECEIVER

CODE

INPUT

DOCK

AUDIO

INFO

OPTION

CREEN

TUNER

NET

TUN./CH

IRIU

HOLD

CATEGORY

ENTER

RETURN

1 2 3 4 5 6 7 8 9

Automatic speaker setup

Cursor keys

Summary of Contents for RX-A710

































































































































Search results

Summary of Contents for RX-A710

Reviews:

Related manuals for RX-A710

Brands by name

Popular brands

Yamaha RX-A710, Owner'S Manual

Search results

Summary of Contents for RX-A710

Reviews:

Related manuals for RX-A710

Brands by name

Popular brands