4-13
On-Command four-wheel drive switch
“2WD”/“4WD”
1. Lever
2. On-Command four-wheel drive switch “2WD”/“4WD”
To change from 2WD to 4WD, stop the vehi-
cle, and then set the switch to “4WD”. When
the vehicle is in 4WD, the four-wheel-drive in-
dicator light “ ” or, for special edition models,
the four-wheel-drive indicator “
” on
the
multi-function meter unit display will come on.
To change from 4WD to 2WD, stop the vehi-
cle, be sure the lever is set to position
a
, and
then set the switch to “2WD”.
WARNING
POTENTIAL HAZARD
Changing from 2WD to 4WD or from
4WD to 4WD-LOCK (“DIFF.LOCK”), or
vice-versa while the vehicle is moving.
WHAT CAN HAPPEN
The vehicle handles differently in 2WD
than in 4WD and in 4WD-LOCK in some
circumstances. Changing from 2WD to
4WD or from 4WD to 4WD-LOCK, or
vice-versa while moving may cause the
vehicle to unexpectedly handle differ-
ently. This could distract the operator
and increase the risk of losing control
and an accident.
HOW TO AVOID THE HAZARD
Always stop the vehicle before chang-
ing from 2WD to 4WD or from 4WD to
4WD-LOCK, or vice-versa.
U5UG12.book Page 13 Thursday, June 23, 2005 9:02 AM
