8-10
To change the engine oil (with or without
oil filter cartridge replacement)
1. Remove the console. (See page 8-8 for
console removal and installation proce-
dures.)
2. Start the engine, warm it up for several
minutes, and then turn it off.
3. Place an oil pan under the engine to col-
lect the used oil, and then remove the en-
gine oil filler cap.
4. Remove the engine oil drain bolt to drain
the oil from the crankcase.
1. Engine oil drain bolt
NOTE:
_
Skip steps 5–7 if the oil filter cartridge is not
being replaced.
_
5. Remove the oil filter cartridge with an oil
filter wrench.
1. Oil filter cartridge
2. Oil filter wrench
NOTE:
_
An oil filter wrench is available at a nearby
Yamaha dealer.
_
U5UG12.book Page 10 Thursday, June 23, 2005 9:02 AM
