40
6. See “Reading the charging status for battery pack”, and
check that the battery charger is charging the battery
pack.
7. The battery capacity indicator lamps will light up one by
one until all four are on. Then, when charging is com-
plete, all of the lamps will go off.
8. Confirm that charging is complete, and then disconnect
the charging plug from the battery pack.
How to disconnect the plug (see the left figure)
Grasp the lock-release ring.
Pull it out straight.
9. Place the cap on the battery pack’s charging connec-
tor.
10. Mount the battery pack on the bicycle.
WARNING
• Do not touch charger contacts with metallic ob-
jects. Do not allow foreign material to cause short
circuit of the contacts. This could result in electric
shock, fire, or damage the battery charger.
• Periodically remove dust from the power plug.
Dampness or other issues could reduce the effec-
tiveness of the insulation, resulting in fire.
• Never disassemble or modify the battery charger.
This could result in fire or electric shock.
• Do not use with a power strip or extension cord.
Using a power strip or similar methods may exceed
rated current and can result in fire.
• Do not use with the cable tied or rolled up, and do
not store with the cable wrapped around the charg-
er main body. Cable damage can result in fire or
electric shock.
• Firmly insert the power plug and the charging plug
into the socket. Failure to insert the power plug and
the charging plug completely can result in fire
caused by electric shock or overheating.
• Do not use the battery charger near flammable ma-
terial or gas. This could result in fire or explosion.
• Never cover the battery charger or place other ob-
jects on top of it while charging. This could result
in internal overheating leading to fire.
Lock-release ring
Lock-release ring
MY2019_E-KIT(X0R8)US英語_OWNERS MANUAL.indd 40
2018/04/27 13:37:34
41
TIP
Battery pack mounting method (Down tube type)
•
Insert the battery in the direction of the arrow so that
the battery bottom is aligned to the top of the case.
•
Insert the upper part of the battery in the direction of
the arrow so that the battery handle is aligned to the
top of the battery lock.
•
Press the upper part of the battery toward the frame
until it clicks into place to secure it.
TIP
How to install Multi location type battery packs varies be-
tween bicycles. For more information, see the instruction
manual supplied with the bicycle.
11. Make sure that it is securely attached by pulling the
battery pack after installation.
WARNING
• Do not short the contacts of the battery pack. Do-
ing so could cause the battery pack to become hot
or catch fire, resulting in serious injury or property
damage.
• Do not disassemble or modify the battery pack. Do-
ing so could cause the battery pack to become hot
or catch fire, resulting in serious injury or property
damage.
• Do not dispose of the battery pack in a fire or ex-
pose it to a heat source. Doing so could cause an
explosion, resulting in serious injury or property
damage.
• Do not drop the battery pack or subject it to impact.
Doing so could cause the battery pack to become
hot or catch fire, resulting in serious injury or prop-
erty damage.
NOTICE
Make sure there is no foreign matter on the battery
pack contacts before inserting the battery pack.
Top of the case
Battery bottom
Battery lock
Battery handle
MY2019_E-KIT(X0R8)US英語_OWNERS MANUAL.indd 41
2018/04/27 13:37:41
29
Summary of Contents for PW-SE
Page 2: ...Content Sommaire en Original instructions 3 fr Original instructions 50 2 ...
Page 4: ...4 ...
Page 49: ...49 ...
Page 95: ...95 ...