54
Power supply of external devices via USB connection
*Applies only to the Display X.
Symptom
Check
Action
Power is not supplied.
Is the display
unit’s power on?
Press the power switch on
the display unit to turn the
power on.
Is the USB
version correct?
Use an external device that
complies with USB 2.0.
Is the USB
cable type
correct?
Use an OTG cable. Also
connect the host side to
the display.
Is the USB
cable firmly
connected?
Re-connect the USB cable.
Is the USB
receptacle or
USB plug
terminal dirty or
wet?
Disconnect the USB cable
from the display unit and
external device. Remove
the dirt and water on the
USB receptacle and USB
plug terminal and re-
connect the cable.
Is USB setting
set to “COMM”?
Set the USB settings to
“PWR SPLY” by referring to
“Stopwatch and settings”
or turn off the power and
then turn it on again.
MY2019_E-KIT(X0R8)US英語_OWNERS MANUAL.indd 54
2018/04/27 13:38:17
42
Summary of Contents for PW-SE
Page 2: ...Content Sommaire en Original instructions 3 fr Original instructions 50 2 ...
Page 4: ...4 ...
Page 49: ...49 ...
Page 95: ...95 ...