Yamaha Portatone PSR-5700, Authorized Product Manual

Page: 85 / 140

The Custom Accompaniment Programmer
EDITING A PREVIOUSLY SAVED USER
INTRO, FILL-IN, OR ENDING PATTERN
To edit intro, fill-in, and ending patterns that you have
previously created and saved, simply select the custom ac-
companiment to which the user patterns are assigned (Cus0
...5) and follow steps 4 through 8, above.
CREATING A NEW INTRO, FILL-IN, OR
ENDING PATTERN
After selecting an intro, fill-in, or ending pattern as de-
scribed in step 4, above, use the [DELETE] button to delete
all data from all tracks. Then follow steps 5 through 8 to
create your original pattern.
To create an intro, fill-in, or ending pattern with a differ-
ent time signature, go to the “1 CUSTOM ACCOMP” screen
and set the “BEAT” parameter as required. If you delete and
save the intro pattern, the fill-in pattern, and the ending pat-
tern, the “1 CUSTOM ACCOMP” screen will appear auto-
matically no matter what pattern edit mode you’re in, and
you can set the “BEAT” parameter as required.
Use the synchro start function when you want to enter data
precisely on the first beat of the first measure.
l l
EXITING FROM THE CUSTOM ACCOMPANIMENT MODE
To exit from the custom accompaniment mode, press ei-
ther the [CUSTOM ACCOMPANIMENT PROGRAMMER]
or [EXIT] button. This will return you to the normal play
mode.
If you have not performed a save operation via the “5
SAVE TO ACCOMP” screen after performing any other
operation in the custom accompaniment mode, however, the
following display will appear automatically when you exit
from the custom accompaniment mode:
To save the edited data before exiting, use the left [-] and
[+] buttons to select the destination custom accompaniment
number, and then press the [+] button below “YES” on the
display. If you want to exit without saving, simply press the
[-] button below “NO” on the display.
You can return to the custom accompaniment mode by press-
ing both the right [-] and [+] buttons simultaneously.
If you attempt to exit after programming an intro, fill-in,
or ending pattern, the following display will appear:
From this display you will exit to the “SET INTRO/FILL/
ENDING” display, from which you can exit as described
above.
25