Yamaha Portatone PSR-5700, Authorized Product Manual

Page: 28 / 140

Using the Accompaniment Section
Using the Disk Style on the Supplied Data Disk
The Disk Style
70’S DISCO
The data disk supplied with the PSR-5700 contains 1 disk style that can be used in addition to the 36
internal styles. Use the following procedure to assign the desired disk style to the [DISK] style button on
the PSR-5700 panel.
Insert the Data Disk
Press [FROM DISK]
Press the Right [+] Button
Insert the data disk into the PSR-5700 disk drive (located below the right
end of the keyboard) with the disk shutter facing the drive slot and the label
side facing upward.
Press the [FROM DISK] button. The display shown to the left should
appear.
Selecting a DISK Style
Press the right [+] button to begin loading. “Don’t remove disk” will
appear on the display while the data is loading. “Completed!” will appear
briefly when the data has been successfully loaded, and the normal play
mode will then be automatically engaged.
If you press the right [-] button instead of the [+], the load operation will
be cancelled and the normal play mode will be engaged immediately.
The data disk contains sequence and custom style data in addition to the disk
style data. This data will be loaded as well as the disk style data when the
above procedure is carried out. See “F5 DISK” on page 46 of the Advanced
Features manual for instructions on how
to
load only the disk style data.
If an error message appears during the disk load procedure, refer to page 48 of
the Advanced Features manual for details.
Once loaded, the disk style can be selected and used in the same way as
the internal styles by pressing the [DISK] button.
Disk style data that has been loaded into the PSR-5700 can be saved to a
different floppy disk, See page 46 of the Advanced Features manual for details.
25