manualshive.com logo in svg

Yamaha Portatone PSR-5700, Authorized Product Manual

Share
Download
Yamaha Portatone PSR-5700 Authorized Product Manual Download Page 109

 [F6] Utility & MIDI

The [F6] function accesses to utility functions and a versatile range of MIDI functions.
MIDI, the Musical Instrument Digital Interface, is a world-standard communication interface that

allows MIDI-compatible musical instruments and equipment to share musical information and control
one another. This makes it possible to create “systems” of MIDI instruments and equipment that offer

far greater versatility and control than is available with isolated instruments. The PSR-5700 offers a

range of MIDI functions that allow it to be used in even sophisticated MIDI systems.

• 

Always use a high-quality MIDI cable to connect MIDI OUT to MIDI IN terminals. Never use MIDI cables longer than about 15
meters, since cables longer than this can pick up noise which can cause data errors.

1 MEMORY BACKUP

Purpose:

Turns memory backup on or off.

Procedure:

Use the left [-] and [+] buttons to turn memory backup on

or off.

• Sequencer Song Data • Manual Bass Voice
• Custom Accompaniment Data
• Custom Voice Data

• Transpose Data
• Tune

• Disk Style Data • IA On/Off

Notes:

The data backed up (retained in memory even when the

power is turned off) by the PSR-5700 are listed below. When

memory backup is turned OFF, the initial factory settings are

automatically recalled whenever the power is turned on.

• IA Part
• Super Style Play Mode
• Reverb On/Off
• Reverb Type & Depth

• Panel Registration Memory Data • Accompaniment Variation • Effect On/Off
• Voice Registration Memory Data • Multi Pad Select
• Multi Pad Data
• Tempo Change Data

• Pad Synchro, Break, Repeat, On/Off

• Effect Type & Depth

• Left Hold On/Off

• Memory Backup On/Off
• MIDI Transmit Ch

• Percussion Pad Data • Key Velocity On/Off • MIDI Receive Ch
• Super Style Play Data
• Voice Part Select

• Foot Switch Assign Data
• Foot Switch Percussion

• MIDI Split Send Ch

• Orchestration • Expression Pedal Assign Data

• MIDI Rhythm Receive Ch

• Orchestra 1 Voice • Sustain On/Off

• MIDI Sequencer Ch
• MIDI Multi Part Ch

• Orchestra 2 Voice • Sustain Part Select • MIDI Multi Part Volume
• Orchestra 1 Octave • Pitch Bend Select • MIDI Multi Part Voice
• Orchestra 2 Octave • Wheel On/Off
• Harmony On/Off • Wheel Type

• MIDI Switch (Control Change, Pitch Bend, Program

• Harmony Type • Split Point

Change, System Exclusive)

• MIDI Clock

• Style • IA Mode • MIDI Local On/Off
• ABC On/Off • Auto Solo On/Off
• ABC Mode • IA Sensitivity

• MIDI Transpose Add Note
• MIDI Split Send On/Off, Enable

* The above data will be retained in memory for about one week even if the power is not turned on. To retain the

backed up data for longer periods, turn the power switch ON for a few minutes at least once a week.

* The default setting for this parameter is “OFF”.

Data Backed Up When MEMORY BACKUP is OFF

• Sequencer Song Data
• Custom Accompaniment Data

• Voice Registration Memory Data
• Multi Pad Data

• Custom Voice Data • Tempo Change Data
• Disk Style Data • Percussion Pad Data
• Panel Registration Memory Data • Super Style Play Data

49

Summary of Contents for Portatone PSR-5700













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands