35
<Soft Pedal> 43H
Cntrl# parameter
Data Range
67
Soft Pedal
0...127 (0-63:Off, 64-127:On)
If the Part Parameter Rcv SOFT PEDAL = OFF, that Part will
not receive Soft Pedal Messages. When the SOFT PEDAL is
set “ON” the effect will take place from the next Key On sig-
nal. Messages will control the Filter Cutoff Frequency. De-
pending upon the Voice, the effect may or may not have an
effect.
<Harmonic Content> 47H
Cntrl# parameter
Data Range
71
Harmonic Content 0...127 (0:-64, 64:+0, 127:+63)
Messages which adjust the resonance set for each. Based on a
standard of 64, these values will be added to or subtracted from
the Voice data. Depending on the Voice, the effective range
may be narrower.
<Release Time> 48H
Cntrl# parameter
Data Range
72
Release Time
0...127 (0:-64, 64:+0, 127:+63)
Messages which adjust the envelope release time. Based on a
standard of 64, values will be added to or subtracted from the
Voice data. Depending on the Voice, the effective range may
be narrower.
<Attack Time> 49H
Cntrl# parameter
Data Range
73
Attack Time
0...127 (0:-64, 64:+0, 127:+63)
Messages which adjust the envelope attack time. Based on a
standard of 64, values will be added to or subtracted from the
Voice data. Depending on the Voice, the effective range may
be narrower.
<Brightness> 4AH
Cntrl# parameter
Data Range
74
Brightness
0...127 (0:-64, 64:+0, 127:+63)
Default:40H
Messages which adjust the filter cutoff frequency. Based on a
standard of 64, values will be added to or subtracted from the
Voice data. Depending on the Voice, the effective range may
be narrower.
<Data Increment / Decrement> 60H/61H
Cntrl# parameter
Data Range
96
Increment
0...127
97
Decrement
0...127
The data byte is ignored.
RPN messages which increase or decrease the MSB value of
the parameter by 1.
<NRPN (Non-Registered Parameter Number)
LSB/MSB> 62H/63H
Cntrl# parameter
Data Range
98
NRPN LSB
0...127
99
NRPN MSB
0...127
If the Part Parameter Rcv NRPN = OFF, that Part will not
receive NRPN Messages.
First send the NRPN MSB and NRPN LSB to specify the pa-
rameter which is to be controlled. Then use the Data Entry to
set the value of the specified parameter.
The following NRPN numbers can be received.
NRPN
Data-entry
MSB LSB MSB parameter
Data Range
01H 08H mmH Vibrato Rate
mm:00H-40H-7FH
(-64-0-+63)
01H 09H mmH Vibrato Depth
mm:00H-40H-7FH
(-64-0-+63)
01H 0AH mmH Vibrato Delay
mm:00H-40H-7FH
(-64-0-+63)
The Rate, Depth, and Delay Time for the Vibrato is controlled.
01H 20H mmH Filter Cutoff Frequency
mm:00H-40H-7FH
(-64-0-+63)
01H 21H mmH Filter Resonance
mm:00H-40H-7FH
(-64-0-+63)
01H 22H mmH Filter EG Depth
mm:00H-40H-7FH
(-64-0-+63)
The Cut-off frequency, Resonance, and Envelope Depth for
the Filter is controlled.
01H 30H mmH Bass
mm:00H-40H-7FH
(-64-0-+63)
01H 31H mmH Treble
mm:00H-40H-7FH
(-64-0-+63)
The Bass and Treble are controlled.
01H 63H mmH EG Attack Time
mm:00H-40H-7FH
(-64-0-+63)
01H 64H mmH EG Decay Time
mm:00H-40H-7FH
(-64-0-+63)
01H 66H mmH EG Release
mm:00H-40H-7FH
(-64-0-+63)
The Attack time, Decay time, and Release time for the Enve-
lope are controlled. Based on a standard of 64, values will be
added to or subtracted from the Voice data. Depending on the
Voice, the effective range may be narrower.
<RPN (Registered Parameter Number) LSB/
MSB> 64H/65H
Cntrl# parameter
Data Range
100
RPN LSB
0...127
101
RPN MSB
0...127
If the Part Parameter Rcv RPN = OFF, that Part will not re-
ceive RPN Messages.
In correspondence to the following parameters.
RPN
Data-entry
LSB MSB MSB parameter
Data Range
00H 00H mmH Pitch Bend Sensitivity mm:00H-18H (0-+24)
Default:02H
MIDI Data Format
