14
Selecting Voices
When you use a sound card or a tone generator with no panel buttons...
To select a part for the VL voice you need to use a sequencing software and transmit the following
system exclusive message (part assign parameter) to the “mother” sound card/tone generator:
F0 43 1n 4C 70 nn ss pp F7 (Hexadecimal)
n
: Device Number
nn : Plug-in Board Type (PLG100-VL is “00.”)
ss : Serial Number (which identifies the PLG boards when two same boards are installed)
00 : for first PLG100-VL
01 : for second PLG100-VL
pp : Part Number (to which the PLG100-VL is assigned)
00 : Part 1
:
:
0F : Part 16
7F : off
5.
Press VALUE button to select the Part you want to use.
In the XG Mode: 01–16, off
In the Performance Mode: 01–04, off
• The VL voices cannot be assigned to several parts at the same time since the PLG100-VL is monophonic.
