manualshive.com logo in svg

Yamaha PJP-EC200, User Manual, Page: 53 / 60

Share
Download
Yamaha PJP-EC200 User Manual Download Page 53

53

ADDITION

AL 

IN
FO

RMA

T

IO
N

Q3: Have an audio problem

Problem

Cause

Remedy

The audio from the PC or 
videoconference system 
cannot be heard or is 
distorted.

The input level setting is incorrect.

Configure the input level setting on the device connected 
to this unit.

The input level of CONFERENCE IN is too 
low.

Increase the input level. (page 30)

The audio output to the PC or 
videoconference system 
cannot be heard or is 
distorted.

The output level setting is incorrect.

Switch between MIC level and LINE level depending on 
the device connected to MIC/LINE INPUT. (pages 10 
and 29)

The output level of CONFERENCE OUT is 
too low.

Increase the output level. (page 30)

This unit generates echoes.

The echo canceller setting is improper.

Run the auto analyzer.

The echo reduction level is too low.

Adjust the echo reduction level in the web menu.

The volume level of the speakers is too high.

•

Turn the speaker volume level down.

•

Keep the speakers away from the microphone.

The input gain for MIC/LINE IN is 
extremely high.

Adjust the input gain so that the INPUT LEVEL LED 
does not turn on in red. (pages 9 and 29)

This unit generates acoustic 
feedback noises.

This unit is used in the environment where 
acoustic feedback is frequently generated.

•

Change the positions of the microphone and speakers.

•

Run the auto analyzer.

The feedback suppressor level is too low.

•

Adjust the echo reduction level in the web menu.

•

Configure the "Band width" setting in the web menu. 
(page 26)

The input gain for MIC/LINE IN is 
extremely high.

Adjust the input gain so that the INPUT LEVEL LED 
does not turn on in red. (pages 9 and 29)

Summary of Contents for PJP-EC200





























































Reviews:

No comments