38
This unit records the operation history as system logs
(SYSLOG).
■
Configuring the log settings
Follow the procedure below to change the contents of logs
to be output or specify where to save log files.
1
In the web menu, click "Maintenance".
The "Maintenance" screen appears.
2
In the [SYSLOG Management] field, click
"Edit".
The "SYSLOG Settings" screen appears.
3
Configure the log settings.
Host Address
: Specify where to save log files. Select
"Specify" and then enter a destination IP address.
DEBUG
: Select whether to output information about
the internal processing of this unit.
INFO
: Select whether to output information about
the system status of this unit.
NOTICE
: Select whether to output notifications and
warning information.
Flash-Memory Save Interval
: Select an interval to
automatically save logs to this unit's built-in flash
memory.
If you turn off this unit before logs are saved to this unit's built-in
flash memory, the unsaved logs will be cleared.
4
Click "Apply".
The confirmation screen appears.
5
Click "Close".
The "Maintenance" screen appears again.
Checking the system logs
Note
