PJP-EC200 Setup Procedure
6
selected as “Default device” in the audio property settings of your PC.
2)
Make sure the external device connected to CONFERENCE IN/OUT is
used in the audio settings of your webconference system.
3)
Disable the echo canceller and noise reduction functions of your
webconference system.
4)
Turn up the speaker volume.
5)
While the other end is talking, adjust the speaker output level of your PC
or webconference system so that the INPUT LEVEL LED (green) of
CONFERENCE IN turns on and the CLIP LED (red) does not turn on.
12.
Adjust the speaker volume.
1)
While the other end is talking, adjust the speaker volume.
13.
Adjust the microphone gain of this unit.
1)
Adjust MIC/LINE IN1.
i.
While talking into the microphone, use GAIN IN1 to increase the
microphone gain gradually.
ii.
Adjust the microphone gain so that the INPUT LEVEL LED (green)
turns on and the CLIP LED (red) does not turn on.
2)
Adjust MIC/LINE IN2.
i.
In the same way, adjust the microphone gain for MIC/LINE IN2.
3)
If the CLIP LED (red) of MIC/LINE IN turns on when the other end’s voice
is reproduced from the speakers, use GAIN to decrease the microphone
gain or turn down the speaker output level of your PC or webconference
system so that the LED does not turn on.
14.
Adjust the microphone level of your PC or webconference system.
1)
Check the current microphone level by using a sound recorder.