Important Safety Instructions
iii
English
FCC INFORMATION (for US customers)
FOR CANADIAN CUSTOMERS
This product meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number (REN) is an indication
of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of
any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five.
Important safety instructions
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock
and injury to persons, including the following:
1. Do not use this product near water for example, near a bath tub, wash bowl, kitchen sink, or swimming pool, or in a wet
basement.
2. Do not use this product near water for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or
near a swimming pool.
3. Do not use the telephone to report a gas leak in the vicinity of the leak.
SAVE THESE INSTRUCTIONS
notice in order for you to make necessary
modifications to maintain uninterrupted service.
If the PJP-50R causes harm to the telephone network,
the telephone company will notify you in advance that
temporary discontinuance of service may be required.
But if advance notice isn’t practical, the telephone
company will notify the customer as soon as possible.
Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
If trouble is experienced with the PJP-50R, for repair
or warranty information, please contact Yamaha
Corporation. If the equipment is causing harm to the
telephone network, the telephone company may
request that you disconnect the equipment until the
problem is resolved.
Ringer Equivalence Number (REN)
The Ringer Equivalence Number (REN) is used to
determine the number of devices that may be
connected to a telephone line. Excessive RENs on a
telephone line may result in the devices not ringing in
response to an incoming call. In most but not all areas,
the sum of RENs should not exceed five (5.0). To be
certain of the number of devices that may be connected
to a line, as determined by the total RENs, contact the
local telephone company. For products approved after
July 23, 2001, the REN for this product is part of the
product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by ##
are the REN without a decimal point (e.g., 03 is a REN
of 0.3). For earlier products, the REN is separately
shown on the label.
This equipment complies with Part 68 of the FCC rules
and the requirement adopted by the ACTA. On the
back of the main body of this equipment is a label that
contains, among other information, a product identifier
in the format US:AAAEQ##TXXXX. If requested,
this number must be provided to the telephone
company.
A plug and jack used to connect this equipment to the
premises wiring and telephone network must comply
with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant
telephone cord and modular plug is provided with this
product. It is designed to be connected to a compatible
modular jack that is also compliant. See installation
instructions for details.
Use the RJ-11C modular cable to connect this unit and
telephone network.
Connect to party line service is subject to state tariffs.
Contact the state public utility commission, public
service commission or corporation commission for
information.
If your home has specially wired alarm equipment
connected to the telephone line, ensure the installation
of this product does not disable your alarm equipment.
If you have questions about what will disable alarm
equipment, consult your telephone company or a
qualified installer.
The telephone company may make changes in its
facilities, equipment, operations or procedures that
could affect the operation of the equipment. If this
happens, the telephone company will provide advance
