TROUBLESHOOTING
43
En
Eng
lish
ADDITIONAL
INFORMATION
In case of a transmission error without a status message appearing on the front panel display of this unit, check the connection to your
iPod (refer to page 11).
iPod
Note
Status message
Cause
Remedy
Page
READING
This unit is in the middle of recognizing
the connection with the iPod.
If the message continues to appear on the front panel
display and playback does not start, connect the iPod
again.
—
UNKNOWN
There is a problem with the signal path
from the iPod to this unit.
Connect the iPod again.
The iPod being used is not supported by
this unit.
Only iPod classic, iPod nano (2nd, 3rd, 4th, 5th and
6th generation), iPod touch (1st, 2nd, 3rd, and 4th
generation), iPhone, iPhone 3G/3GS, iPhone 4, and
iPad are supported.
The iPod software is out of date.
Update the iPod software version to the latest.
—
STOP
The play back of the iPod is finished.
For example, all the songs in the
selected album have finished being
played back.
NO iPod
The iPod was disconnected from this
unit.
Connect the iPod and this unit by a USB cable
correctly.
Problem
Cause
Remedy
Page
No sound.
The power of this unit is off.
Connect the power cable correctly.
The iPod software version has not been
updated.
Download the latest iTunes software to update the
iPod software version to the latest.
—
The iPod is in the process of connecting
with this unit.
Please wait for a while.
—
No sound.
The iPod sounds, but
you cannot operate it
with this unit or the
remote control.
The iPod is not connected correctly.
Connect the iPod and this unit by a USB cable
correctly.
No sound of your
iPod from the TV.
No sound of your iPod can be output
from this unit to the TV through the
HDMI cable.
Use the speakers of this unit.
—
This unit cannot be
operated by the
remote control.
The iPod is not supported by this unit.
Only iPod classic, iPod nano (2nd, 3rd, 4th, 5th and
6th generation), iPod touch (1st, 2nd, 3rd, and 4th
generation), iPhone, iPhone 3G/3GS, iPhone 4, and
iPad are supported.
The iPod is not connected correctly.
Connect the iPod and this unit by a USB cable
correctly.
The iPod software version is out of date.
Update the iPod software version to the latest. If the
problem cannot be solved, even with the latest
software, reset the iPod.
—
You cannot operate
from the iPod.
The iPod is not connected correctly.
Connect the iPod and this unit by a USB cable
correctly.
The playback
information is not
displayed on the
front panel display.
The iPod you set is not compatible with
the playback information display.
Only iPod classic, iPod nano (2nd, 3rd, 4th, 5th and
6th generation), iPod touch (1st, 2nd, 3rd, and 4th
generation), iPhone, iPhone 3G/3GS, iPhone 4, and
iPad are supported.