Yamaha Phazer PZ50X 2008, Supplementary Service Manual

Page: 103 / 212

53
SPEC
MAINTENANCE SPECIFICATIONS
ELECTRICAL
Model PZ50/PZ50GT/PZ50RT/PZ50MT/PZ50VT/PZ50MP
Voltage 12 V
Ignition system:
Ignition timing (B.T.D.C.) 5° at 1,800 r/min
Advanced type Digital type
Ignition coil:
Model/Manufacturer F6T567/MITSUBISHI
Ignition spark gap 6.0 mm (0.24 in)
Primary coil resistance 1.19 ~ 1.61
Ω
at 20 °C (68 °F)
Secondary coil resistance 8.5 ~ 11.5 k
Ω
at 20 °C (68 °F)
Charging system:
Type A.C. magneto
Nominal output 14 V/less than 35 A at 5,000 r/min
DC-T.C.I.:
Magneto model/Manufacturer F4T39471/MITSUBISHI
Standard 14 V 31.5 A, 440 W at 5,000 r/min
Stator coil resistance (color code) 0.22 ~ 0.26
Ω
at 20 °C (68 °F) (White – White)
ECU model/Manufacturer F8T83573/MITSUBISHI (PZ50/PZ50GT/PZ50RT/PZ50VT/
PZ50MP)
F8T83574/MITSUBISHI (PZ50MT)
Rectifier/regulator:
Type Short circuit type
Model/Manufacturer FH012/SHINDENGEN
No load regulated voltage (DC) 14.2 ~ 14.8 V
Capacity (DC) 50 A
Withstand voltage 40 V
Battery:
Manufacturer YUASA
Type YTX14-BS 12V-12Ah
Ten hour rate amperage 1.2 A
Electric starter system:
Type Constant mesh type
Starter motor:
Model/Manufacturer 8GC/YAMAHA
Output 0.90 kW
Armature coil resistance
Continuity check 0.009 ~ 0.011
Ω
at 20 °C (68 °F)
Insulation check More than 100 k
Ω
at 20 °C (68 °F)
Brush
Overall length 10.8 mm (0.43 in)
<Wear limit> 3.65 mm (0.14 in)
Spring pressure 5.28 ~ 7.92 N (538 ~ 808 g, 19.01 ~ 28.51 oz)
Commutator diameter 24.5 mm (0.96 in)
<Wear limit> 23.5 mm (0.93 in)
Mica undercut 1.5 mm (0.06 in)
Starter relay:
Model/Manufacturer MS5F-571/JIDECO
Amperage rating 180 A
Coil resistance 4.18 ~ 4.62
Ω
at 20 °C (68 °F)