NXES104 EXPANSION BOARD AND REMOTE CONTROL
(8) Output meters
For each channel there are two output meters; the left one is showing the output voltage
(V), whether the right one is showing the output current (A).
(9) Mute button
Click on this button to mute or unmute individually a channel.
(10) Volume control
This button can set up the volume for each channel of the NXAMP. To adjust the volume
with this virtual pot, you can click and drag the button itself or use the mouse wheel while
you are on the virtual pot area or use the two small arrows bellow the virtual pot.
N.B.: On some setups the volume settings may be linked.
(11) Gain control
To adjust the gain on one channel, use the two small arrows bellow the value display. You
can also simply goes onto this control and use the mouse wheel.
N.B.: On some setups the volume settings may be linked.
(12) Delay settings
Use the small buttons bellow the text box to increase or decrease the delay settings for
each channel.
N.B.: On some setups the delay settings may be linked.
(13) ArrayEQ settings
To adjust the ArrayEQ on one channel, use the small arrows bellow the text box. You can
also simply go to this control by utilizing the mouse wheel.
N.B.: On some setups the ArrayEQ settings may be linked.
(14) Headroom settings
By using the small arrows bellow the text box the Headroom value for one channel can be
adjusted. You can also simply go to this control by utilizing the mouse wheel.
N.B.: On some setups the Headroom settings may be linked.
(15) Amplifier Status
This control displays the current status of the Amplifier. If all parameters are OK (like
temperature, DC offset, mains value, etc…) the display will be “NXAMP ALL OK”. If not, the
PAGE 71 OF 91
