MENU DESCRIPTION
When the remote controls are LOCKED, the user can monitor the unit but cannot change
settings through the network. However, the MUTE buttons are still working. This feature is
enabled through the same password.
When this menu is entered, the following display will appear:
Local : FREE Remote : FREE Control
To change either the local or the remote control access, press the corresponding “Select 2”
(for local control) or “Select 4” (for remote control) button. If the password has not been
entered yet, it will be asked now.
Password ? Control
Prev A_______ Next
If the wrong password is entered, it will be displayed and you can then only go back to
previous menu, which will be still in read-only. If the good password is entered, you then
either go back and edit the previous menu (press “Select 4”), or change the current
password (press “Select 1”). In this last situation, you will need to enter the new password.
Password Ok
Change
Back
In the previous menu, you can then press the “Select 2” or “Select 4” buttons and toggle
the Local or Remote access between FREE or LOCKED. If you leave this menu and come
back to this security menu later on, you will need to enter the password again.
PAGE 51 OF 91
