NXES104 EXPANSION BOARD AND REMOTE CONTROL
Select the group you wish to put the NXAMP in. You can group NXAMP4x1 and NXAMP4x4
into the same group. One NXAMP can be part of several groups (for example you can do a
group with all units, and some smaller ones for specific applications).
The remote control page of the group can be accessed if you press the “Group” tab in the
left view of ESmonitor. If you select a non empty group, you will be able to access the
remote control page of the group, like shown bellow:
Note that only some settings are accessible to the user, if then the user interface is the
same than for an individual NXAMP. On top of the output meters you can choose the
NXAMP of the group you wish to monitor the output meters.
If some settings are different between two units inside the same group, the corresponding
control will be displayed in RED. Once a control is changed in the group control page, the
settings will be applied to all units in the group.
(7) Input Patch
For each channel, you can see eight buttons corresponding to the eight available inputs (4
analog, from A to D, and 4 digital, from E to H). Click on the button to patch or unpatch an
input. If the button is dark, it means that the input is patched, if not it is white.
N.B.: On some setups the input patch may be linked.
PAGE 70 OF 91
