21
YMC-700/YMC-500
YMC-70
0/YMC-50
0
Supplementary information
When writing of the firmware is started, the power indicator (left side) lights.
If an error occurs while writing the firmware, the power indicator (right side) lights and the power indicator (left side)
goes off.
POWER indicator
(left side)
This unit
POWER indicator
(right side)
3. When writing of the firmware is completed, the power of this unit turns off automatically.
*
When an error message is displayed before writing is completed, perform the operation procedures from step 1
to 3 again.
4. Start up the self-diagnostic function and select R. ROM VER/SUM menu.
Using the sub-menu, have the firmware version and checksum displayed, and then check that they are the same
as written ones.
When the displayed firmware version and checksum are different from written ones, perform the Operation
5. Press the “STANDBY/ON” key to turn off the power.
Error messages
Contents
NO DEVICE
The USB storage device is not connected.
NO FILE
The firmware is not found in the USB storage device.
INVALID FILE
The firmware is not applicable to YMC-700/YMC-500.
BLOCK x ERROR
The firmware writing error on Block x.
Fig. 5
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299