Yamaha neoHD YMC-700, Service Manual

Page: 32 / 101

32
YMC-700/YMC-500
YMC-70
0/YMC-50
0
–>
B: SPEAKER SET
1: FRNT: SML
NOW EXECUTING
VOLUME: 25
AUDIO: ANALOG
VIDEO:
– –
B: SPEAKER SET
Using the sub-menu, the audio input signal is selected and output.
1: FRONT : SML 0dB
The signal, 90 Hz or lower, is mixed into the
channel specified by LFE/BASS.
Audio input select: ANALOG
2: CENTER : NONE
The CENTER signal is distributed to FRONT
L/R.
Audio input select: OPTICAL
5: TONE : MIN
The audio signal is output with the tone control
“BASS -6 dB, TREBLE -6 dB”.
Audio input select: ANALOG
3: LFE / BASS : FRONT
The LFE/BASS signal is distributed to FRONT
L/R.
Audio input select: OPTICAL
The analog switch settings for each sub-menu are as shown in the table below.
4: TONE : MAX
The audio signal is output with the tone control
“BASS +6 dB, 6 dB”.
Audio input select: ANALOG
LARGE : This mode is used for a speaker with
high bass reproduction performance (a
large unit). Full bandwidth signals are
output.
SMALL : This mode is used for a speaker with
low bass reproduction performance (a
small unit). The signals of 90 Hz or less
are mixed into the channel specified
by LFE/BASS.
NONE : This mode is used for no center speaker.
The center content is reduced by -3 dB
and distributed to FRONT L/R.
SWFR : LFE of 5.1 ch signal or LFE/BASS
lower than 90 Hz is output through
SUBWOOFER OUT.
FRONT : LFE of 5.1 ch signal or LFE/BASS lower
than 90 Hz is distributed to FRONT L/R.
FRONT CENTER SURROUND SUBWOOFER
1 FRONT : SML 0dB SMALL LARGE LARGE SWFR
2 CENTER : NONE LARGE NONE LARGE SWFR
3 LFE / BASS : FRONT LARGE SMALL SMALL FRONT
4 TONE : MAX LARGE LARGE LARGE SWFR
5 TONE : MIN LARGE LARGE LARGE SWFR
Example
www. xiaoyu163. com
QQ 376315150
9 9
2
8 9
4 2
9 8
TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com