Yamaha MusicCast AVENTAGE RX-A4A User Manual Download Page 339

Page: 339 / 411

No sound from the playback device connected to the unit with
HDMI

(

The TV does not support HDCP (High-bandwidth Digital Content Protection).

Refer to the instruction manuals for the TV and check the TV’s specifications.

(

The number of devices connected to the HDMI OUT jack exceeds the limit.

Disconnect some of the HDMI devices.

(

“HDMI Audio Output” in the “Setup” menu is set to “Off”.

Set the appropriate HDMI audio output to “On”. For details, see the following:

(

“Setting the output of HDMI audio to the TV's speakers” (p.246)

339

TROUBLESHOOTING > When any problem appears

Summary of Contents for MusicCast AVENTAGE RX-A4A




























































































































































































































































































































































































































Search results

Summary of Contents for MusicCast AVENTAGE RX-A4A

Reviews:

Related manuals for MusicCast AVENTAGE RX-A4A

Brands by name

Popular brands

Yamaha MusicCast AVENTAGE RX-A4A, User Manual

Search results

Summary of Contents for MusicCast AVENTAGE RX-A4A

Reviews:

Related manuals for MusicCast AVENTAGE RX-A4A

Brands by name

Popular brands