manualshive.com logo in svg

Yamaha MusicCast AVENTAGE RX-A4A, User Manual

The Yamaha MusicCast AVENTAGE RX-A4A is a high-performance AV receiver that delivers exceptional audio quality and functionality. To unlock its full potential, you can easily obtain the user manual for free download on our website manualshive.com. Discover the ultimate audio experience with this state-of-the-art device.

Share
Download
background image

Zone output

Multi-zone output

Multi-zone output is shown as follows.

Input

Output

Using the unit’s internal

amplifier

Using an external amplifier

EXTRA SP 1-2 jacks

ZONE OUT jacks

HDMI OUT 3 (ZONE OUT)

jack

Zone2

Zone2

Zone2

Digital audio (HDMI)

m

(*2)

m

(*2)

m

(*4)

Digital audio (COAXIAL/
OPTICAL)

m

(*3)

m

(*3)

Analog audio (AUDIO)

m

m

USB (*1)

m

m

Network sources (*1)

m

m

TUNER

m

m

m

: Available

*1

To play back DSD audio in Zone2, select “Main Zone Sync” as the Zone2 input, or use the party mode.

*2

It is available when PCM signals (2 channels) are input. Stereo output (mixed down to 2 channels) is available when the
multichannel signals are input. DSD audio is available only when the input source selected in the Main zone is selected.

*3

It is available when PCM signals (2 channels) are input.

*4

It is available when PCM signals (2 channels) are input. Stereo output (mixed down to 2 channels) is available when the
multichannel signals are input.

NOTE

During the party mode, the input source selected in the Main zone is played back in all zones.

Related links

(

“Connecting zone speakers using the unit’s internal amplifier” (p.162)

(

“Connecting zone speakers using an external amplifier” (p.163)

(

“Enjoying the same source in multiple rooms (party mode)” (p.168)

393

APPENDIX > Zone output

Summary of Contents for MusicCast AVENTAGE RX-A4A




























































































































































































































































































































































































































Reviews:

No comments

Related manuals for MusicCast AVENTAGE RX-A4A

Xtrend ET6500 User Manual preview
ET6500
Brand: Xtrend Pages: 65
FUTABA 14SG Instruction Manual preview
14SG
Brand: FUTABA Pages: 169
Rohde & Schwarz 6144.7800.02 Operating Manual preview
6144.7800.02
Brand: Rohde & Schwarz Pages: 189
a-them AVM 90 Operating Manual preview
AVM 90
Brand: a-them Pages: 68
LVSUN LS-PAB90S-2U User Manual preview
LS-PAB90S-2U
Brand: LVSUN Pages: 7
RCAVICTOR 721TS Service Data preview
721TS
Brand: RCAVICTOR Pages: 26
Jensen VM9116 Operating Instructions Manual preview
VM9116
Brand: Jensen Pages: 60
Sirius Satellite Radio Streamer GT SIR-SL1 User Manual preview
Streamer GT SIR-SL1
Brand: Sirius Satellite Radio Pages: 25
R.V.R. Elettronica BRAVO-RX Usage Instruction preview
BRAVO-RX
Brand: R.V.R. Elettronica Pages: 94
Realistic TRC-473 Owner'S Manual preview
TRC-473
Brand: Realistic Pages: 17
Walter Dittel FSG 90F Installation & Operation Manual preview
FSG 90F
Brand: Walter Dittel Pages: 30
Videotec MICRODEC485 Operating Instructions Manual preview
MICRODEC485
Brand: Videotec Pages: 37
Daytona mp26 Operating And Installation Instructions preview
mp26
Brand: Daytona Pages: 143
QRP Labs QMX Assembly Manual preview
QMX
Brand: QRP Labs Pages: 66
PowerBass PS-WB110T Application & Enclosure Manual preview
PS-WB110T
Brand: PowerBass Pages: 12
National NC-46 Instruction Manual preview
NC-46
Brand: National Pages: 15
Tokai LAR-11 User Manual preview
LAR-11
Brand: Tokai Pages: 11
HITEC MINIMA 6S Instruction preview
MINIMA 6S
Brand: HITEC Pages: 2

Brands by name

Popular brands

Load more brands