Yamaha MusicCast AVENTAGE RX-A4A User Manual Download Page 33

Page: 33 / 411

HDMI OUT 3 (ZONE OUT) jack

For connecting to an HDMI-compatible device (such as the TV) used in another room (Zone2) and for outputting
video/audio (p.164).

NETWORK jack

For a wired connection to a network (p.80).

PHONO jacks

For connecting to a turntable (p.74).

ZONE OUT jacks

For connecting to the external amplifier used in another room (Zone2) and for outputting audio (p.163).

PRE OUT jacks

For connecting to a subwoofer with built-in amplifier (p.69) or an external power amplifier (p.82).

SPEAKERS terminals

For connecting to speakers (p.37).

AC IN jack

For connecting the supplied power cable (p.86).

PART NAMES AND FUNCTIONS > Unit body

Summary of Contents for MusicCast AVENTAGE RX-A4A




























































































































































































































































































































































































































Search results

Summary of Contents for MusicCast AVENTAGE RX-A4A

Reviews:

Related manuals for MusicCast AVENTAGE RX-A4A

Brands by name

Popular brands

Yamaha MusicCast AVENTAGE RX-A4A, User Manual

Search results

Summary of Contents for MusicCast AVENTAGE RX-A4A

Reviews:

Related manuals for MusicCast AVENTAGE RX-A4A

Brands by name

Popular brands