5
Software Installation
Uninstall (removing the installed
application)
You can remove the installed application software.
Select [START] (
→
[Settings])
→
[Control Panel]
→
[Add/Remove
Programs]
→
[Install/Uninstall], then select the application to be
removed and click [Add/Remove...].
Follow the on-screen instructions to uninstall the application.
n
The button names or menus may differ depending on the computer OS.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Acrobat Reader
In order to view the electronic (PDF) manuals included with each application,
you’ll need to install Acrobat Reader.
n
If an older version of Acrobat Reader is installed on your PC, you’ll need
to uninstall it before proceeding.
1
Double-click on the “Acroread_” folder.
Four different language folders will be displayed.
2
Select the language you want to use and double-click on its folder.
The file “arxxx***.exe” file will be displayed. (“xxx” indicates figures and
“***” indicates the selected language; e.g., “ar500enu.exe”.)
3
Double-click on “arxxx***.exe.”
Acrobat Reader Setup Dialog box will be displayed.
4
Execute the installation by following the on-screen directions.
After installation is complete, the Acrobat folder appears on your PC (in
Program Files, as the default).
For information on using the Acrobat Reader, refer to the Reader Guide in the
Help menu.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
USB MIDI Driver
To operate the MOTIF-RACK from your computer via USB, you’ll need to
install the appropriate driver software.
The USB-MIDI driver is software that transfers MIDI data back and forth
between sequence software and the MOTIF-RACK via a USB cable.
Windows 98/Me users
→
See below.
Windows 2000/XP users
→
●
Installing the driver on a Windows 98/
Me system
1
Start the computer.
2
Insert the included CD-ROM into the CD-ROM drive.
3
Make sure the POWER switch on the MOTIF-RACK is set to OFF and
use the USB cable to connect the USB terminal of the computer (or the
USB hub) to the USB terminal of the MOTIF-RACK. When the MOTIF-
RACK is turned on, the computer automatically displays the “Add New
Hardware Wizard.” If the Add New Hardware Wizard does not appear,
click “Add New Hardware” in the Control Panel.
n
For Windows Me users, check the radio button to the left of
“Automatic search for a better driver (Recommended)” and click
[Next]. The system automatically starts searching and installing the
driver. Proceed to Step 8. If the system does not detect the driver,
select “Specify the location of the driver (Advanced)” and specify
the CD-ROM drive’s “USBdrv_” folder to install the driver.
4
Click [Next].
The window below enables you to select the search method.
Computer
MOTIF-RACK
USB cable
Driver
Sequence
Software
Windows 98
Windows Me
English
