Trouble Recovery
89
2.
Put the engine in the desired position,
then tighten the manual valve screw by
turning it clockwise.
EMU31783
Water separator-alert indicator blinks
while cruising
WARNING
EWM01500
Gasoline is highly flammable, and its va-
pors are flammable and explosive.
●
Do not perform this procedure on a hot
or running engine. Allow the engine to
cool.
●
There will be fuel in the fuel filter. Keep
away from sparks, cigarettes, flames or
other sources of ignition.
●
This procedure will allow some fuel to
spill. Catch fuel in a rag. Wipe up any
spilled fuel immediately.
●
The fuel filter must be reassembled
carefully with the O-ring, filter cup, and
hoses in place. Improper assembly or
replacement could result in a fuel leak,
which could result in a fire or explosion
hazard.
If the water separator-alert indicator on the
Command Link tachometer blinks, perform
the following procedure.
1.
Stop the engine.
2.
Remove the top cowling.
3.
Disconnect the water detection switch
coupler.
NOTICE:
Be careful not to get
any water on the water detection
switch coupler, otherwise a malfunc-
tion could occur.
[ECM01950]
4.
Unscrew the filter cup from the filter
housing.
NOTICE:
Be careful not to
twist the water detection switch lead
when unscrewing the filter cup.
[ECM01960]
1. Manual valve screw
ZMU05018
1
1. Water separator-alert indicator
1. Water detection switch coupler
1
ZMU05502
✩✫✳✬✤✲ ✫✬
©
2019 Yamaha Motor Corporation, U.S.A.
Summary of Contents for LZ200
