Engine control system
43
switch of the engine overheating. If the alert
system has activated, stop the engine and tilt
the outboard motor up to check the cooling
water inlet for clogging. If the alert system
has still activated, tilt the overheated out-
board motor up and return to the port.
EMU26848
Oil level alert and oil filter clogging
alert
Oil injection models
This engine has an oil level alert system. If
the oil level falls below the lower limit, the
alert system will activate.
Activation of alert device
●
Engine speed will automatically decrease
to about 2000 r/min.
●
The oil level-alert indicator will light or
blink.
●
The buzzer will sound (if equipped on the
tiller handle, remote control box, or main
switch panel).
If the alert system has been activated, stop
the engine and check for the cause.
TIP:
The alert for oil filter clogging is similar to the
alerts for low oil level and overheating. To
make troubleshooting easier, check for en-
gine overheating first, then oil level, and fi-
nally oil filter clogging.
ZMU03942
ZMU04586
1. Oil filter
ZMU03025
OFF
START
ON
OFF
START
ON
ZMU04584
1
ZMU03987
✩✫✳✬✤✲ ✧✦
©
2019 Yamaha Motor Corporation, U.S.A.
Summary of Contents for LZ200
